Information Blog: web

So youve set your Raspberry Pi up.
If not you might want to check out this page first.
So now you want to set your Raspberry Pi up as a media/web/everything else server.

Before any of these, make sure your raspberry pi ip address is static. You can set this by opening up a terminal and typing in:
sudo nano /etc/network/interfaces

(Feel free to use gedit or vim or whatever you want. I like vim)
You should now be looking at a file. Change the line:
iface eth0 inet dhcp
To:
iface eth0 inet static
address 192.168.1.10
netmask 255.255.255.0
gateway 192.168.1.254

where the gateway is your router and the address is the ip address you want. Save the file and reboot (sudo reboot) and now your ip should be static.

Luckily, SSH is already enabled on the Raspbian image so we wont go into that. However, if you want to SSH externally, you should install something like SSHGuard for protection and then in your router config redirect port 22 traffic to your Raspberry Pi.

Section 1: Webserver

Installing apache is easy. Just open a terminal and type:
sudo apt-get install apache2

This will set up a webserver for you with the files at /var/www being your web directory. Modify those files how you feel like and if you want to make it publicly accessible then configure your router to forward port 80 to your raspberry pis ip address.

Section 2: VNC

This is an optional thing since you can port X over SSH. But if you want vnc. All you have to do is open up a terminal and type:
sudo apt-get install tightvncserver

When it is finished installing it should ask for a password. If it doesnt or you need to change it. Just type vncpasswd to reset it.
Then type tightvncserver and a new instance will start. You can kill it by typing tightvncserver -kill :1

To use this externally, you will have to open up port 5801 (for the first instance, 5802 for the second, etc.)

Section 3: Media Server

Start off by mounting all of your external HDDs. If you have a Raid array that is great, if not, I have a handy little hack for you.
edit fstab by opening up a terminal and typing:
sudo nano /etc/fstab
Add each hard drive to the file, mine looks like this:
/dev/sda1 /media/Kingsley ntfs-3g defaults 0 0
/dev/sdb1 /media/HarvardMulligan ntfs-3g defaults 0 0
/dev/sdc1 /media/Moloch ntfs-3g defaults 0 0

(Make sure the folders in /media exist and their permissions are set properly with chmod, otherwise this wont work)

You really should set up a RAID array or something, but lets say you like to live by the seat of your pants and dont care if one of your HDDs fail and you want to access them all at the same time in one convenient directory. To do this you can use mhddfs. Install it by typing:
sudo apt-get install mhddfs

When its done installing, open fstab back up and after the lines with your HDD, type in something like what is shown below:
mhddfs#/media/Kingsley,/media/HarvardMulligan,/media/Moloch /media/ALLOFIT fuse defaults,allow_other 0 0

So my final fstab file has this at the bottom:
/dev/sda1 /media/Kingsley ntfs-3g defaults 0 0
/dev/sdb1 /media/HarvardMulligan ntfs-3g defaults 0 0
/dev/sdc1 /media/Moloch ntfs-3g defaults 0 0
mhddfs#/media/Kingsley,/media/HarvardMulligan,/media/Moloch /media/ALLOFIT fuse defaults,allow_other 0 0

where mhddfs mounts all of the drives to /media/ALLOFIT (which I previously created and set permissions for) and I can write to that and mhddfs will figure out where to put it for me.
Now just sudo reboot

Interesting tidbit: You can use sshfs (their is a Windows version call win-sshfs) to access these drives securely through ssh. This way you dont have to worry about Samba and you can access these files graphically using the internet.

Section 4: Torrent Box

So now you want to be able to torrent (lets assume completely legally) things directly to your server/external HDDs.
Simply install transmission by opening up a terminal and typing
sudo apt-get install transmission-daemon

Now we need to edit some settings, stop the daemon and open up the settings file by typing:
sudo service transmission-daemon stop
and
sudo nano /etc/transmission-daemon/settings.json

You will need to change a couple of settings.
Change your download directory to where you want your downloads, I use my external HDDs: "download-dir": "/media/ALLOFIT",
Now to set up some security. Change the following text requires the ""s but numbers and true/false dont:
"rpc-authentication-required": true,
"rpc-enabled": true,
"rpc-password": "YourPasswordHere",
"rpc-port": 6669,
"rpc-username": "YourUserNameHere",

You can change the port to anything but its probably a good idea to change it from the default to avoid brute force script kiddies.
Now start the daemon back up by typing
sudo service transmission-daemon start

Now open up a webbrowser on any computer in your network and type in your raspberry pis ip address followed by :port. Ex: 192.168.1.10:6691
If you want to access this externally, just forward the port you chose to your raspberry pi ip address in your router config.

Now you are done.

To use transmission to its fullest potential and automatically download media:
http://stevenhickson.blogspot.com/2013/03/automatically-downloading-torrents-with.html

Check out my other Raspberry Pi Fixes/How tos:
http://stevenhickson.blogspot.com/2012/08/setting-up-omxplayer-gui-on-raspberry-pi.html
http://stevenhickson.blogspot.com/2012/10/fixing-raspberry-pi-crashes.html