If you notice sluggish system performance while operating your Compaq desktop computer, it may prove helpful to install additional memory. While Compaq desktops vary slightly from one model to another, the basic steps involved in adding memory modules remain the same. Although the prospect of working inside your computer may seem unnerving if you have no prior experience, the actual process of adding memory is very straightforward and should take no more than a matter of minutes to complete.
Things Youll Need:
- Memory module
- Phillips screwdriver
- Step 1
Shut down the computer. Disconnect the power cord, monitor, mouse, keyboard, Ethernet cable and any other attached devices from the computer. Move the computer to a clean work space and rotate it until the rear panel is in view.
- Step 2
Unscrew the screw securing the side panel to the rear of the computer. Slide the side panel toward you until it comes free of the computer. Remove the side panel and set it aside.
- Step 3
Place the computer on its side. Touch a nearby metal surface (such as the rear panel of the computer) to ground yourself before proceeding. Examine the motherboard and locate the sockets for the memory modules. Select the module socket located nearest the already-installed memory modules.
- Step 4
Align the notch on the bottom end of your memory module with the crossbar in the socket. Insert the module into the socket and apply firm pressure until it is fully seated.
- Step 5
Replace the side panel and screw it securely into place. Return the computer to its previous location and reconnect all previously disconnected cables and devices.
- Step 6
Turn the computer on and hold down the BIOS access key (depending on the computer, this key may be "F1", "F3", "F10", or "Esc." Examine the entries labeled "Installed Memory" and "Memory Bank" to confirm that the module is properly installed and recognized. Installation is now complete.
0 comments:
Post a Comment